Archive for Hoodman

The infamous Parts List

Posted in DSLR Video with tags , , , , , , , , , , , , on March 16, 2010 by evanbutson

After a lot of emails I have finally relented and got off my butt and put together a detailed list of the components that make up my rails rig.

PROAIM FOLLOW FOCUS, RAILS, MATTE BOX KIT: Available from a variety of places, I got mine off eBay, just google it and you should find a few sources. I used this as the basis for my kit, figuring I could upgrade bits as I went along, which I did. And continue to do. I have written a more detailed post on the bits here, so wont re-invent the wheel.

microShoulderMount for 35mm Adapters Bundle (Patent Pending): Redrock gear is nice, very nice, the shoulder mount stuff is the best I have seen and not too expensive. Using this bundle with the ProAim kit means you get the best bits of RedRock with the cheaper ProAim rails and camera mount.

microMount 3 pack : These little microMounts are great, you can pop them anywhere on the Rails or the handle bar and mount lights, LCD monitors, audio recorders etc. They have a little spigot that drops in, so if you need to take something off the rails quickly you don’t need to remove the whole microMount.

Cinevate Universal Rails Block for 15mm Rods: I bought a couple of these, mainly to use to mount the DVtec springed Pole but also as another way of mounting things on the rig. Cinevate gear is pricey but awesome quality. I also use their Nikon to Canon lens adaptors, and after a friend got one from another company literally stuck on his lens, he borrowed my Cinevate one and now only uses them.

MicroLink 4 Riser & 4″ Carbon Fibre Rails: After mounting my camera and the viewfinder I discovered that for it to be completely comfortable I needed to offset the shoulderpad, I ordered two of these Risers and the carbon fibre rails thinking I would need the two rails to handle the weight of the rig, however as this was my first experience with carbon fibre rails I had no idea how strong and flex resistant they are, so I only needed one. Sometime in the future I hope to order a couple of longer carbon fibre rods to replace my metal ones, purely to save on weight.

LCDVF from Jag35: After buying the Hoodman Loupe which is not to fine a point on it, a total piece of crap. I decided to take a punt on the LCDVF for two reasons, one it was noticeably cheaper than the Zacuto ZFinder and it was a lot longer which matches the ergonomics of my rig more. I am happy to report that this unit is everything I could have hoped for, focusing is a breeze and it is supremely comfortable.

Springed Shock Absorbing Pole: DVtec actually sell whole support rigs and one of the camera ops I work with has one, however, as I had the vast majority of the gear already in terms of the camera mount I didn’t want the whole DVtec solution, so I just ordered the support pole from them. This inserts into the spring mounted on the Cinevate block, the other end goes into a small holder that I wear on an off the shelf Weightlifter belt. This not only supports almost all of the weight of the rig without the need for counterbalance, but it also absorbs a lot of the slight movement when walking etc. And finally means I can hold the camera with one hand and us the other to operate follow focus, adjust camera settings etc. Something I can’t do if I use the counter balance approach.

And that’s it. I am looking at probably replacing the follow focus soon, probably with the RedRock unit, the ProAim unit still works fine but I have a few big time gigs coming up and I would feel a fair bit safer with the RedRock unit and the ProAim as a backup in case I have problems. That and eventually replacing the rails with carbon fiber to save on weight and I am pretty much done. I am still on the lookout for a good handle system to add, there are a few different types available but so far none that I am 100% happy with.

Nikon D300s Rig – Video Runthrough

Posted in DSLR Video with tags , , , , , , , on October 28, 2009 by evanbutson

So here it is a little video showing my completed rig for my D300s. Please to enjoy.
Vodpod videos no longer available.

The D300s Support Rig is finished, finally

Posted in DSLR Video with tags , , , , , , , , , on October 27, 2009 by evanbutson

So after many online orders, a few mistakes and one fraudulent use of my credit card by a ner-do-well later my support rig for my Nikon D300s is finished.

I’ve put together a short video running through the new gear and how it is configured. It is rendering as we speak (couldn’t help putting some Magic Bullet on it) I will add it here as soon as it is done but in the meantime.

PAS_3179

And now for the detailed breakdown, some of this will be a slight re-hash of earlier posts but with my perspective on some of the parts I have had for a while now.

The Base: ProAim RAILS system

So I took a punt on these, they were cheap, and by cheap I mean the entire bundle of Rails, quick release plate, Matte Box and Follow Focus, costs a little less than just a single Follow Focus from Redrock or a Matte Box set from Arri etc.

railsBut I have to say I am very happy with them, the rails work a treat, the mount is very stable, and comes with all the extra bits that sometimes you have to order separately, for example, after I got the Hoodman and the Shoulder Mount riser, I discovered that I really wanted to raise my camera a bit from the rails, luckily the ProAim kit comes with a set of shims, and it was a simple matter of undoing a couple of hex screws with the supplied allen keys and adding the desired amount of shims to raise the camera to exactly where I wanted it. The Mate box is pretty good, I’m not in love with the filter holders and will probably at some stage replace it with a Red Rock Mattebox that swings out (making lens changes MUCH easier. But they work and do the trick.

s-mat-13

The follow focus is pretty good, it is by no means perfect, there is no way of adjusting tension as you can with the better ones, although I did find that I could sort of fake tension adjustment by adjusting how tight the gears were mounted to the ring on the lens.

PAS_3185

Interestingly I think the main takeaway here is that normal still camera lenses are just not designed for smooth moving focus changes like film lenses, so no matter how great the follow focus unit you are still hampered by the still camera lenses. The quick release plate that comes with the kit is the same form factor as the Manfrotto 501 plate, of which I have several, so I can take the camera off the rails kit and move it to another tripod without having to change baseplates. All in all I am very happy with the kit, and the best part is as time goes by I can upgrade individual pieces as I desire.

Shoulder Mount:

I knew that this is where I was going to have to spend money, experience has taught me that where the camera meets the body you do not want to scrimp. As such I ordered the Redrock Micro  – Micro Shoulder Mount 35mm upgrade kit which consists of the shoulder piece, the front handle bar with a long and a short bar and two handles.

microSM_v2_35mm_bundle_lg

To that I also added a Micromount which allows you to mount things like an LCD or a small light such as a lightpanel by way of a standard spigot.

microMountAnd finally I ordered a Hoodman Loupe kit for video DSLR’s. I looked long and hard at the Zacuto, but honestly my credit card was starting to fall apart from overuse and at the time they were back-ordered. So I figured I would give the Hoodman a go and then maybe in the future upgrade to the Zacuto. So how is the Hoodman? Well it is a BIG step up from having no eyepiece, it definitely makes focusing easier. The mount system they have come up with, which is effectively two large rubber bands is a bit laughable, I am in the process of hand making a hard mount system that will allow me to slide the Hoodman on and off the camera easily but not move when it is attached, once again Redrock make a after market mount, but honestly $55 for a small piece of pressed aluminum, I think I can handle that myself 🙂

PAS_3182

It was at this stage that I realized a flaw in my plan, the Hoodman attached and the shoulder mount attached to the rails, I realized that funnily enough mu shoulder is not exactly in line with my eye and so I could either have a really comfortable should mount and have the Hoodman not near my eye, or I could pop my eye on the Hoodman and the should rig was no longer where it needed to be. So out came the scarred and frying credit card again and after a lot of staring at the rig I decided that to offset the shoulder mount I would need two microLink 4 risers with two 4 inch rails. I figured I would need two of these and I though that with effectively the entire weight of the whole rig on one riser, it would end up twisting. I ended up getting two 4 inch graphite rods from Redrock as the price difference with aluminum was marginal. When the parts came however, I first put the system together with both risers but the carbon fiber rods were so stiff I figured I would take a punt and see if a single riser would work. The takeaway story here is, you now where you here people say carbon fiber is REALLY strong, REALLY lightweight and REALLY stiff? They’re not kidding. With the entire rigs weight effectively resting on these two small rods, there is ZERO flexing or movement. I love these carbon fiber rods so much, as soon as I can I will probably upgrade the rails on my system to all carbon fiber, as I now feel VERY confident that they will work perfectly and save a bit of weight as well.

PAS_3190

So basically I now had a rig that I could rest comfortably on my shoulder, focus easily and see what I am shooting even in bright sunlight. The only problem is it was not the lightest kit in the world, and a month of shooting the Olympics with the Panasonic HVX 202 definitely showed me that even what you think is a light camera gets VERY heaving day after day. About the same time a friend who actually owns a 202 had popped in to work with his kit, a while back he had ordered a support kit for his camera from a company in Israel called DV Tec. Basically it is a spring mounted rod and shoulder mount system.

dvrigpro5100k

After playing with it for a while I decided that the whole rig was kind of pointless for me, seeing as the rails and the shoulder mount kit would be duplicated a fair amount. But the spring loaded pole would be a perfect addition, so I ordered just the pole and with the addition of a support belt (which as an added bonus helps when throwing all the Pelican cases around on shoots) and I have a nice little support system that takes the majority of the weight of the camera but doesn’t cut down any of the flexibility. All I had to do to add the pole into the system was I had a small rail mounting block I had ordered from Cinevate, I just mounted a small spring the same size as on my friends rig into the centre hole. this is then mounted on the rails after the Matte Box, the pole then slots into this, providing easier movement as well as being very quick to attach and de-attach if you suddenly don’t want the rig on.

PAS_3200

And that’s about it. My next plan is to mount a battery on a plate from the shoulder mount. This will not only power a small LCD that I have to mount on the microLink, but it will also add a counterbalance to the front heavy nature of the rig and also give me a place to mount a radio mic. That being said, there is always something to alter change or upgrade. But for the meantime I am happy, now for the track dolly I have been meaning to build……….

Final Parts of the D300s Story

Posted in DSLR Video, Technology with tags , , , , , , , , , on September 26, 2009 by evanbutson

OK, so a quick post (weather in Melbourne has been horrendous so haven’t had a chance to get out and so any more shooting)

First things first, I have ordered the final parts of kit to make up my system, here’s a list and the reasons for my decision.

1. Ref Monitor: OK so the D300s uses the mini HDMI connector (which I didn’t have) so I ordered an adapter and sat and waited for it to arrive. And arrive it did. I patched in the camera to my 1080p Ref monitor in my edit suite, preparing for the picture to wonder and amaze me (keeping in mind the composite out of the camera wasn’t too great, it was like it was a 320 x 240 image blown up, not very useful for focusing) So I figured HDMI out must be razor sharp. Alas, not so much, the image is better but still not what i was hoping for. It kind of makes it hard to drop over a thousand dollars on a Marshall LCD with HDMI in, when the picture quality doesn’t justify it. So for the time being I have ordered one of these, it is mainly for shot framing whilst shooting, not for color or focus adjustment. And until I can get a Marshall to test with the HDMI I think it will have to do.

Red LCD

2. Eyepiece: My first little test shoot showed me that I simply must have an eyepice for the Liveview when shooting outdoors, cant justify the cost of a Zacuto just yet so I have ordered a Hoodman Loupe, not as elegant as the Zacuto but it is a fair bit cheaper.

Hoodman

3. Shoulder Kit: I love what Redrock do, and would love to drop a few thousand on all their kits, but in the meantime, I have ordered just these bits, I am hoping they will work well with the Proaim rails kit I already have, giving me a nice shoulder rig for not a lot of money.

microSM_v2_35mm_bundle_lg And finally, been doing a bit of research on the best way to deal with the exposure joy that is the D300s in video mode, and I stumbled across a YouTube clip where the user showed the results of setting exposure on a 50% grey card, versus the camera setting exposure on the content in the scene. The results were very interesting. I haven’t really ever used a grey card before, but I think that this may be a good technique for me to get into.

Also, at my ‘day job’ we have just finished acquiring gear for a new Podcast we are filming. We needed to record 3 independent mics at the same time with massively differing levels, and we wanted tot ability to individually edit each mic in post. So after a bit of research we ended up getting one of these. An Edirol R-44. It gives us four discreet inputs, records to SDHC cards up to 24 bit / 192kHz. We have only had it for a few days but so far I am mightily impressed. It only has unbalanced outputs but I am not too worried about that as the signal on the SDHC card is where the money is, but it does mean we can send the audio out of the mixer/solid state recorder back to the camera, be it a HDV camera or my D300s as a safety backup and an easy way of syncing the clips. Will let you know how it goes when we have done our first shoot in a week or so.

R-44__R44large